chibajoe
9 post s
11-Mar-2008
1:40 AM
|
I know you are already up to your eyeballs in projects, but would you have any interest in duplicating the quad rail on the M17S on the bottom? M17S with quad rail
Last Edited on 12-Mar-2008 10:52 AM
|
Administrator
KVW
3671 post s
11-Mar-2008
6:21 AM
|
I make top, bottom, and side rails, effectively duplicating this.
Does the extension have a second nosecap?
Interesting, but machining it from solid billet would be intense. Maybe an extrusion?
Thx!
----------
Kurt@KKF
Member-The Fightin' 420/Sumter Div.
Last Edited on 13-Mar-2008 4:39 AM
|
chibajoe
10 post s
12-Mar-2008
10:44 AM
|
Yes, it's made in two pieces. There is a end cap for the receiver that looks similar to the one you did for the squared off M17, and then the quad rail, which also takes the place of the barrel spacer/tensioner on a regular M17. It actually looks similar to the quad rail that's out there for the PS90s, so I'm kinda wondering if it's just been adapted from some other application. When I bought it I thought it was one of your guns, but after I got it and was able to take it apart I realized that it couldn't be (some of the details are a too sloppy). If you're interested, I'll pull it apart and send it your way, but I really don't want to distract you from your other projects (like the 5.45 barrels, hint, hint ;D ).
|
easy610
1 post
4-Apr-2008
9:21 AM
|
Chibajoe, what is the OAL of those two M17Ss, plz? I have one en route (bone stock) than I plan to shorten down to 26", remove top handle, add rail top and bottom, etc, etc. They look good. Tks, easysixonezero
|
Administrator
KVW
3707 post s
7-Apr-2008
6:34 AM
|
I found a complete stock M17S which will be in my hot little hands soon!
----------
Kurt@KKF
Member-The Fightin' 420/Sumter Div.
Last Edited on 7-Apr-2008 6:34 AM
|
chibajoe
12 post s
9-Apr-2008
7:15 PM
|
OAL is 27" on the green one, and 28" for the black one. I wouldn't go less than 26.5"; BATFE tape measures are know to be a little short, if you know what I mean. ;)
Last Edited on 9-Apr-2008 7:18 PM
|
